We proudly serve commercial buildings which house healthcare, education, industrial, corporate, technology, pharmaceutical, religious, and non-profit facilities.

 
pexels-pixabay-263402 (1).jpg

Healthcare Facilities

Infection control to reduce contact transmission, droplet transmission, and airborne transmission

  • Isolation rooms: airborne infection isolation and protective environment rooms, including negative and positive pressure isolation rooms

  • Ante rooms: negative, positive, and net neutral

  • Room pressure monitors

  • Directional control of airflow

  • Air distribution and filtration

  • High-Efficiency Particulate Air (HEPA) filters

  • Ultraviolet Germicidal Irradiation (UVGI)

  • Odor control

  • Local exhaust ventilation and exhaust fans

  • Air distribution duct work

  • Temperature and humidity controls

  • Chillers

  • Cooling towers

  • Energy conservation measures:

    • Optimal room pressurization

    • Efficient filtration

    • Optimized air distribution and equipment sizing

    • Heat recovery devices

pexels-philipp-birmes-830891 (1).jpg

Corporate Office Facilities

  • Chillers – water cooled, air cooled, absorption

  • Boilers – steam, hot water

  • Burners – gas, oil, dual fuel

  • Cooling Towers

  • Heat Exchangers – plate and frame, shell and tube

  • Fluid Coolers

  • Pumps – base mounted, in-line

  • Fuel Oil Pumps, Tanks

  • Steam Condensate Pumps – electric, steam powered

  • Computer Room Equipment – in-row, below floor, spot coolers

  • Refrigeration – walk in boxes, ice machines, low temp freezers

  • Air Handlers – rooftop packaged units, energy recovery units, indoor units

  • Fans – exhaust, return, process, etc

  • Filtration Systems – water and air

  • Terminal Units – VAVs, VRVs, fan coils, unit heaters, heat pumps

  • Steam Traps, Valves, Actuators, etc.

pexels-pixabay-257636.jpg

Industrial Manufacturing Facilities

  • Indoor and outdoor air handlers of all sizes

  • Industrial pumps and piping

  • Heat and energy recovery units

  • Precision controlled humidification and dehumidification

  • High-efficiency air filtration to remove particulate matter down to the specs required for your processes

  • Odor control

  • Local exhaust ventilation and exhaust fans

  • Air distribution ductwork

  • Temperature and humidity controls

  • Process cooling and evaporative towers

  • Chillers

  • Cooling towers

  • Refrigeration systems

  • Boilers

  • Rooftop units

  • Electronic, PLC, and Building controls

  • Optimal room pressurization

  • Efficient filtration

  • Optimized air distribution and equipment sizing


pexels-pixabay-159490.jpg

Education, Religious, and Non-Profit Facilities

  • Mini-split systems for zone cooling and heating

  • Ceiling fans to circulate heated air down from high ceilings

  • Variable speed heating and cooling to prevent noisy on/off cycles

  • Energy recovery systems for energy savings

  • Radiant heating for quiet operation

  • Water loop heat pump systems to conserve energy

  • Programmable thermostats for scheduled heating and cooling

  • HEPA filters or scrubbers for cleaner air

pexels-thisisengineering-3861463.jpg

Pharmaceutical and Technology Facilities

  • Customized Air filtration and environmental systems

  • Cleanroom design (all classifications)

  • Multiple stage HEPA air filters

  • Air systems compliant with GMP regulations

  • Controls for airborne particles, dust, and microorganisms

  • Controls to maintain delta P, relative humidity, and temperature

  • Make-up air filtration

  • Once-Thru HVAC systems

  • Recirculated HVAC systems

  • Constant Volume Systems with Terminal Reheat (CVRH)

  • Variable Air Volume Systems (VAV)

  • Chilled water plants

  • Steam and hot water plants

  • Automatic optimization controls

  • Fault detection

  • Energy dashboards

  • Continuous measurements of system inputs

pexels-michael-morse-1054230.jpg

Environmental Facilities

  • Cleanroom (all classifications)

  • Multiple stage HEPA air filters

  • Air systems compliant with GMP regulations

  • Controls for airborne particles, dust, and microorganisms

  • Controls to maintain delta P, relative humidity, and temperature

  • Make-up air filtration

  • Once-Thru HVAC systems

  • Recirculated HVAC systems

  • Constant Volume Systems with Terminal Reheat (CVRH)

  • Variable Air Volume Systems (VAV)

  • Chilled water plants

  • Steam and hot water plants

  • Automatic optimization controls

  • Fault detection

  • Energy dashboards